Set a code for your precious safe! Controls
Set the clock to manual mode. Set your desired code using pins 2 to 4. Once you've done so, toggle pin 7 to ON, press the clock button then toggle pin 7 back OFF--the safe is now set! Turn ON pin 1, and press the clock button. The seven segment display should show "L" (for locked). Next turn OFF pin 1 to begin entering codes.
None
| # | Input | Output | Bidirectional |
|---|---|---|---|
| 0 | segment a | ||
| 1 | reset | segment b | |
| 2 | code bit 0 | segment c | |
| 3 | code bit 1 | segment d | |
| 4 | code bit 2 | segment e | |
| 5 | segment f | ||
| 6 | segment g | ||
| 7 | set code |